Purchased equipment: 5000 lb/hr steam boiler
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

5000 lb/hr steam boiler
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Consider Installing High-Pressure Boilers wit

pressure of the boiler steam to 600 psig. With a 50% isentropic turbine efficiency, the exhaust steam from the backpressure turbine is at 100 psig and 527ºF and must be desuperheated by adding 5,000 lb/hr of water. In order to provide an equivalent amount of thermal energy to the process loads, the boiler steam output is reduced to 45,000 lb/hr.

Water-tube Boilers - Babcock Wilc

We engineered and supplied a 300,000 lb/hr (136,100 kg/hr) shop-assembled unit, which was shipped by barge and field-installed. The project scope also included all boiler auxiliaries, fans, economizer, valves, instrumentation and installation of all equipment on the boiler island.

Steam Generation Suggested Actions - Department of Ener

Benchmarking the fuel cost of steam generation, in dollars per 1,000 pounds ($/1,000 lb) of steam, is an effective way to assess the efficiency of your steam system. This cost is dependent upon fuel type, unit fuel cost, boiler efficiency, feedwater temperature, and steam pressure.

Boilers | Halgo Pow

A firetube boiler can generate dry saturated steam or, if fitted with a superheater, it can generate superheated steam. Generally, firetube boilers are best suited for applications that require less than 27,600 lb/hr of steam generation.

boiler 500 Kgs/hr steam at 5 psi | Industrial Vertical Boile

This series is horizontal chain grate stoker biomass or coal fired steam boiler, the steam capacity is 1-30t/h, the steam pressure is 0.7-2.5Mpa, the thermal efficiency is >85%.

5,000 Lbs/Hr Mueller Pyro Pure P7505 Clean Steam Generato

Contact J L Mercer today for all of your industrial processing needs toll free at 1- 800-637-2371 View details on the 5,000 Lbs/Hr Mueller Pyro Pure P7505 Clean Steam Generator and thousands of other processing equipment and industrial machines available for sale.

Boiler Capacity - Engineering ToolB

Example - Boiler Horsepower to lbs of Steam Conversion. 200 hp x 34.5 = 6900 lbs of steam per hour. Lbs of steam can be converted to hp by dividing lbs steam per hour by 34.5. Example - Lbs of Steam to Boiler Horsepower Conversion. 5000 lbs of steam / 34.5 = 145 hp boiler. Converting Boiler Horse Power (BHP) to kBtu/hr

Industrial Water-tube Package Boilers - babcock.c

boiler designs to meet targeted, challenging, More than 5,000 B&W industrial water-tube package boilers have been installed in a variety of capable of providing approximately 80,000 lb/hr (36,300 kg/hr) of saturated steam with a design pressure of 250 psig (1.7 MPa).

Consider Installing High-Pressure Boilers wit

pressure of the boiler steam to 600 psig. With a 50% isentropic turbine efficiency, the exhaust steam from the backpressure turbine is at 100 psig and 527ºF and must be desuperheated by adding 5,000 lb/hr of water. In order to provide an equivalent amount of thermal energy to the process loads, the boiler steam output is reduced to 45,000 lb/hr.

How NOT to Design a Steam System - The C&S Compani

5,000 ft/min OK velocity with high quality boiler water and perfect steam system piping 5,500 ft/min Some bouncing waterline will occur even with high quality

Hurst Boiler Sear

Hurst Boiler offers premium customized boiler skid packages for all types of steam and hot water boiler applications. Firebox Boilers. The Hurst Firebox is competitively priced, efficient and flexible three-pass boiler design allowing fuel flexibility for gas, oil, heavy oil, and combination gas/oil. Series 45 Boilers. Three Pass Firebox Design.

text