Purchased equipment: circulating fluidized bed combustion boiler
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

circulating fluidized bed combustion boiler
Others

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Fluidized bed combustion - Wikiped

Fluidized bed combustion (FBC) is a combustion technology used to burn solid fuels. In its most basic form, fuel particles are suspended in a hot, bubbling fluidity bed of ash and other particulate materials (sand, limestone etc.) through which jets of air are blown to provide the oxygen required for combustion or gasification.

Fluidized Bed Combustors for Biomass Boile

Fluidized-bed boilers are the most common type of boiler recommended for biomass fuel, which is burned within a hot bed of inert particles, typically sand. The fuel-particle mix is suspended by an upward flow of combustion air within the bed.

Developments in circulating fluidised bed combusti

Developments in circulating fluidised bed combustion 5 Fossil fuels will remain the primary energy source for electric power generation for the foreseeable future, and coal is the principal fossil fuel of power generation.

Circulating Fluidized Bed Boiler | Industrial Boilers Ameri

Industrial Boilers America utilized Circulating Fluidized Bed Boilers, which is used in power plants. Fluidized beds suspend solid fuels in upward-blowing jets of air during the combustion process. The result is a turbulent mixing of gas and solids.

Circulating fluidized bed combustion (CFBC) - ScienceDire

At the moment, the world’s largest fluidized bed combustion boiler is the second generation of once-through supercritical circulating fluidized bed (CFB OTU-SC) with a capacity of 460 MW e, which is installed in the TAURON Wytwarzanie S.A., a branch of Lagisza Power Plant, Poland.

Circulating fluidized bed - Wikiped

The circulating fluidized bed (CFB) is a developing technology for coal combustion to achieve lower emission of pollutants. By using this technology, up to 95% of pollutants[1] can be absorbed before being emitted to the atmosphere.

Fluidized Bed Combustion | Fluidized Bed Boiler |FB

“Fluidized bed combustion (FBC) is a combustion technology used to burn solid fuels.” A bed of solid particles is said to be fluidized when the pressurized fluid (liquid or gas) is passed through the medium and causes the solid particles to behave like a fluid under certain conditions.

Circulating Fluidized Bed Boiler | CFB Boiler | GE Pow

efficient circulating fluidized bed boiler combustion and fuel flexibility Our CFB boiler technology allows for a wide range of fuels to be burned efficiently. This includes low-grade and difficult-to-burn fuels such as anthracite, lignite, petroleum coke, oil shale, discarded coal, and biomass within a wide range of mixing rates.

Fluidized Bed Combustion FBC Boiler - boilersinfo.c

Fluidized Bed Combustion FBC Boiler Animation MECHANISM OF FLUIDISED BED COMBUSTION If the sand, in a fluidized state, is heated to the ignition temperature of the fuel and the fuel is injected continuously into the bed, the fuel will burn rapidly and the bed attains a uniform temperature due to effective mixing.

Circulating fluidized bed boiler,CFB boiler,Circulatin

Circulating Fluidized Bed (CFB) Boiler capacity: for CFB steam boiler upto 250 ton, CFB hot water boiler upto 170MW. CFB boilers offer benefits such as low pollution, high-efficiency combustion, space saving, and high maintainability. ZG's CFB Boiler technology is expected to be at the forefront of next-generation environmentally conscious boilers.

How Circulating Fluidized Bed Boilers Wor

At the bottom of the boiler furnace there is a bed of inert material. Bed is where the coal or fuel spreads. Air supply is from under the bed at high pressure. This lifts the bed material and the coal particles and keeps it in suspension. The coal combustion takes place in this suspended condition. This is the Fluidized bed.

text