Purchased equipment: circulating fluidized bed industry boiler model
Location: WUXI China
Telephone: +86 13861509127
E-mail: [email protected]
Contact us for more details about our boilers, solutions and services.

circulating fluidized bed industry boiler model

Molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

Technical advantages

Digitized manufacture

  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
  • The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Long life span

  • The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
  • Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
  • Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Less fuel consumption

  • Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
  • Furnace adopts double close line coil, which makes heating surface sufficient.

Add Comment

Global and Chinese Circulating Fluidized Bed (CF

The 'Global and Chinese Circulating Fluidized Bed (CFB) Industry, 2013-2023 Market Research Report' is a professional and in-depth study on the current state of the global Circulating Fluidized Bed (CFB) industry with a focus on the Chinese market.

A mathematical model for a circulating fluidized bed (CF

Based on the special hydrodynamics of the CFB boiler, the cluster renewal model of the bed to membrane wall heat transfer process has been described in the literature . The dilute phase comprises of a continuous upflowing gas phase with thinly dispersed solids (dispersed phased) and relatively denser cluster moving downward along the wall.



Supply High Combustion Efficiency Circulating Fluidize

Reliability circulating fluidized bed boiler is of low-temperature combustion, therefore, nitrogen oxides emissions of such boiler is much lower than that of coal-powder boiler, and such boiler could directly desulfurized during combustion process.

Gas emissions from a large scale circulating fluidized be

A computational model to calculate CO 2, CO, SO 2 and NO x emissions during biomass and lignite co-combustion in a circulating fluidized bed boiler was proposed. The model covers different gaseous pollutants formation and destruction paths.

Biomass-Firing Circulating Fluidized Bed Steam Boiler fo

Fluidized Circulating Bed boiler (as known as FCB boiler) refers to a type of boiler in which polverized fuel is burnt while being blown to circulate in fluidizing motion. FCB boiler is now the most recognizable boiler type, especially in the area of power generation.

Evaluation of the performance of a commercial circulating fluidized bed boiler by using IEA-CFBC model: Effect of primary to secondary air rat

ratio of the CFB boiler. Key words: Circulating Fluidized Bed, IEA-CFB Model, Primary Air Ratio, Yeosu Power Plant INTRODUCTION The use of high-quality coal has been getting limited attention in the electric power generation industry because of its increased price and lack of reserves. So, there has been increased interest in achiev-

DHX Circulating Fluidized Bed Boiler - Zhengzhou Boiler C

DHX Circulating Fluidized Bed Boiler. DHX series circulating fluidized bed boiler has single drum and vertical structure, which has absorbed the advantages of other boilers, effectively avoid problems such as boiler abrasion, coking and blocking of back feeding device, high density of boiler original dust emission, difficulty in slagging.

Circulating Fluidized Bed Boiler - CFB Boiler, Power Plan

Circulating fluidized bed boiler, CFB Boiler for short, is widely used in coal and biomass fuel power plant. One salt manufacturing factory in China purchased the third set of 75ton/h circulating fluidized bed boiler from us.

A coal combustion model for circulating fluidized bed boile

The model described in the previous section was applied to a typical circulating fluidized bed boiler . The technical parameters of the CFB boiler are steam capacity of 35 t h −1 , superheated steam temperature and pressure of 400°C and 2.45 MPa, respectively.

Circulating fluidized bed - Wikiped

The circulating fluidized bed (CFB) is a developing technology for coal combustion to achieve lower emission of pollutants. By using this technology, up to 95% of pollutants[1] can be absorbed before being emitted to the atmosphere.